Gespasa Filters to filter or microfilter diesel, petrol or lubricants. All kind of filter or filter system of Gespasa Spain will be supplied in all over Vietnam market officially by IVA VINA COMPANY
Particle filtration and water absorption.

The microfiltration of fuel is today essential to supply it without contamination to vehicles, eliminate water and avoid the appearance of bacteria.
The modern injection systems inject the diesel to very high pressures of up to 2,500 bar, so the presence of solid impurities seriously affects the injectors and the engine state.
With microfiltration we eliminate solid particles and the presence of water. Eliminating water, we eliminate the medium where bacteria are born, thus eliminating their presence.
Some of the negative effects of solid impurities in an engine include:
- Wear and tear of the injection system and other motor parts: solid impurities cause wear and early breakdown of different engine elements such as fuel pump and injectors.
- Reduction of performance: solid impurities obstruct fuel injectors, which affects injection, reducing engine performance and increases consumption.
- Corrosion acceleration: solid impurities can contain salts and other chemicals that can accelerate the corrosion of the engine components, such as the fuel system and the motor parts.
- Emissions increase: solid impurities can affect fuel quality and increase engine escape emissions, which can be harmful to the environment and human health.
Negative effects of water presence:
- Bacteria appearance
- Increase in fuel consumption
- Power loss
- Oxidation of parts of the injection system
Therefore, it is important to ensure that the diesel fuel used in a diesel engine is clean, free of solid impurities and water, to ensure optimal performance and prolong the engine life. This can be achieved by using efficient fuel filters and making sure that stored fuel is clean and free of water and sediments.
FG-100
5 µm (micron) 105 l/min · F1″ BSP
FILKIT : FILTER · diesel or petrol
FG-100 Filtering spare-parts
FG-150 : 5 µm · 25 or 15 µm 150 l/min · F1 1/2″ GAS (BSP)
FG-150 filtering spare-parts
FG-300: 3 · 5 · 15 or 50 µm 300 l/min · F2″
FG-450 : 3 · 5 · 15 or 50 µm 450 l/min · F2″
FG-700 / FG-1000 : 3 · 5 · 15 o 50 µm · 3″

FG-2000: 3 · 5 · 15 or 50 µm · 2,000 l/min · 6″
FG-300×2 FIXED FILTERING KIT 2″
FG300x2 · MOBILE FILTERING KIT : 50/15 µm · water absorbent
FG-700×2 FIXED FILTERING KIT 3″

FG-450×2 FIXED FILTERING KIT 2″

FG-1000×2 FIXED FILTERING KIT: 4″ 50/15 µm water absorbent
FG-300×2 FIXED FILTERING KIT with pump : 50/15 µm · water absorbent
FG-300×2 · MOBILE FILTERING KIT with pump: 50/15 µm · water absorbent
FG-300-450 filtering spare parts

FUEL TREATMENT SYSTEM: Automatic filtration at scheduled times

BOX TREATMENT SYSTEM: Automatic filtration at scheduled times
YORK BASE FILTERS: 1/2″ to 2″
ALUMINIUM VESSEL FILTER
MULTIVALENT VESSEL FILTER 1″
FUP-1 FILTER: FF1″ · 350 µm (POLYAMIDE + FIBREGLASS)
NEW
FUP-1Blue: F1″ 25 micron stainless mesh

FOOT FILTER

TRANSPARENT VESSEL FILTER: FF3/8″
BRASS FILTERS: “Y” TYPE
NEW
2″ MOISTURE ADSORBING FILTER
- The presence of moisture in lubricants and hydraulic fluids is a constant concern.
- Viscosity changes, rust, oxidation, lubricant additive, and sludge problems are just a few of the problems that can arise when there is moisture.
- Respirators allow flexibility by using 100% silica gel for moisture adsorption or 100% activated carbon for smoke and/or odor control, when required.
- Protect your fluids with contamination control as small as 2 microns!






