Thiết bị đo lưu lượng, đo mức xăng dầu, Van xăng dầu, bơm xăng dầu

*It is suitable for diesel and non-corrosive fluids.

*It is suitable for Adblue/DEF or Phytosanitary products.

*It is suitable for lubricant with 30-1000 cSt viscosity.

USE

• GENIUS is a level monitor in atmospheric tanks.
• The level measurement is made measuring the static pressure of the liquid height through a tube into the tank.
• It allows to measure the level in rectangular and cylindrical, horizontal or vertical, tanks with a maximum height of 4 m.
• Level reading in height (mm or inches) or volume (litres or gallons)
• It is suitable for liquids with a maximum viscosity of 30 cSt.
  * It is not suitable for ATEX classified zone installation.
• PC communication with desktop software GKSuite or communication to DieselPlus cloud software.
• Communication to any PLC or external device via MODBUS RTU

TECHNICAL FEATURES:

• Power: 230 VAC · 110 VAC · 15-32 VDC
• IP-55 Protection
• Accuracy: ±1 % in height
• Resolution: 5 mm

COMPOSED OF

Control unit

• LCD display of 16×2 characters
• 5-key keyboard to access the kit menu

Indicator set

Tube to install on the tank

Connections and cables

• Cable 230 VAC 50/60 Hz · 110 VAC · 15-32 VDC
• Connection cable of the two outputs for full or overfilled tank alarm and empty or minimum level
• RS-485 communication cable
• Connection for the tube installed in the tank

Acoustic alarm in its inner of 90 dB and 2,400 Hz

Configuration of:

• Tank type and dimensions, calibration
• Level alarms
• Level reading type
• Measuring unit

• According to the programmed alarm levels, the control unit will activate or deactivate the contacts, acting as a remote switch for the alarm device operation or the connected control kit operation.
• PC communication kit through the RS-485 communication port
• Connection to PC or GK-7 controller or similar